NESS D8XCel 4G Navigator Alarm Kit with Z-Wave Technology & Sim
1 in stock
- Additional information
- Reviews (0)
56 user codes can be programmed to operate by keypad PIN, radio key or access cards
Inbuilt wireless radio interface so you can add wireless devices such as remotes, PIRS etc
Programmable Two Area partitioning can split the panel into two independent areas plus a common area.
Real Time Clock with AutoTime features – auto arm/disarm, auto aux outputs, time based user control.
3 Door Access Controller onboard with support for Weigand prox card or fingerprint readers.
Programming and remote operation via the free Ness XCEL app
Home Mode allows partial arming, (eg, perimeter security overnight).
• Day Mode feature allows daytime monitoring of fire doors, cool rooms etc.
• Temporary Day Zone feature allows easy enabling/disabling of Day Mode.
• Keypad Panic and Duress feature.
• Two button arming feature.
• Fire Alarm feature with different siren tones.
• Highly flexible zone to output mapping.
• Onboard Vibration Sensor Analyser with programmable sensitivity. Use with Ness sensor™ vibration sensors.
• Multiple programmable EOL resistor values from 0k to 22k (2k2 resistors supplied).
• Siren chirp and strobe flash on arming with radio key.
• Quiet chirps option on arm/disarm by radio key.
• True Dynamic Battery Test actively tests the battery under load every hour and every time a keypad code is entered.
• 4 programmable auxiliary outputs (Up to 8 Aux outputs optional).
• Optional output expander.
• Enhanced serial data input/output via RS232.
• Automatic reset fuses.
• Programmable Reset Output lockout.
• 30 event memory from KPX and Saturn keypads. 80 event memory can be accessed using Navigator keypad or NessComms™.
• Standard defaults to suit most applications.
• Easy programming by keypad or NessComms™ software by direct connect.
• All programming data is permanently stored in a non-volatile memory.
• All inputs and outputs are heavily protected against lightning and high voltage supply transients.
•High efficiency DC power supply with dual 17VAC/20VDC power input
• Inbuilt 4G Communicator
• Direct-connect upload/download using NessComms™ software.
• View system status and arm/disarm using NessComms™.
• Remote control of outputs via telephone with voice prompts.
• Operation via SMS messaging
• Programming via SMS
• Alarm reports via SMS self-monitoring or Central Station
• Central Station monitoring in ARMOR IP and CID formats
• Remote operation via the free NessXCEL SMS app
Includes Ness SIM or BYO SIM
Security Installers & End users can Activate the SIM here at competitive prices
20VDC Plug Pack
12V 7 A/H Back Up Battery
1 x Ip232 module
1 x Z wave kit
Smart Device Apps
Ness Xcel: Ness Xcel app
Android App: Ness aComms
iOS App: Ness iComms
Need additional motion detector PIRs? Simply add more of the Ness Xline Series Pirs
|Dimensions||50 × 40 × 1 cm|